Plus tips on placement and fine-tuning
by Crutchfield's Jeff Miller
Jun 12, 2024
In a nutshell: To get the biggest bang from your new home subwoofer, you need to do three things.
- Properly connect it to your home theater receiver
- Place it in just the right spot
- Tweak it — calibrate your system and adjust the sub's settings
Read on to learn everything you need to know.
T
ight, well-defined and, yes, DEEP bass is a key component of any home theater. A powered subwoofer is a must for bringing those explosions, crashes, and other big-time action to life. Here's how to hook it up and dial it in.
1. How to connect your subwoofer to your receiver
All powered subwoofers require two connections: power and signal.
For power, you just need a nearby outlet. We highly recommend plugging your sub into a power protection device to guard against surges.
For the signal, use a subwoofer cable to connect your receiver’s subwoofer output to the LFE (low frequency effect) input on the sub.
Many stereo receivers and amps also have subwoofer outputs for these connections. Don't have an LFE option? See our bonus tip below.
2. How to choose the right place for your sub
Typically you should try and put the subwoofer near your front speakers. But let’s be honest: most people put their subwoofer wherever they have room. And that’s not necessarily a bad idea.
The low-frequency waves we hear as “bass” are less directional than higher frequencies generated by full-range speakers. That means that even if the subwoofer isn’t close to your TV, your ears will have trouble telling the difference.
Some manufacturers recommend placing your sub in a corner. The walls can help bounce more waves back toward the seating areas. If you’re after very full, exciting bass response, this is a good option.
If you have a few placement options and a long enough subwoofer cable, you may want to experiment with different placement options. Fire up some music with some good bass. Then sit in your primary seat and listen. Does the bass sound weak? Or maybe too boomy?
Now move to a couple of different spots and listen. You’ll probably notice that the bass can sound very different as you change locations.
If you used auto-calibration to set up your home theater system, remember to rerun it every time you move your sub.
To tailor the bass to your “sweet spot” use the popular method known as “crawling.” Start with the subwoofer at or near your primary listening position. Then stand in different spots the sub could go and listen to your chosen sample music. When you find a spot where the bass sounds just right, that’s where you should put your sub.
Not enough bass? Try two subs
If you have a very large room that’s bass-challenged, we recommend adding a second subwoofer. It’s the best option for evenly distributing bass response in a large space. Most newer receivers offer a second subwoofer output for connection. Or you can simply use a Y-adapter.
For some suggestions and diagrams of speaker setups for different floor plans, check out our article on home theater speaker placement.
3. Tweak it
Most receivers include a calibration microphone to optimize the performance of your speakers. Usually, these room correction systems do a very good job of adapting the sound to your surroundings. Check out our Home theater receiver setup guide for more info and to watch a video about auto calibration.
But what if your receiver doesn’t have auto calibration? Or you’ve tried it and still aren't completely satisfied? You can make some manual adjustments.
Setting speaker size — Go into your receiver’s settings menu and find the speaker setup. There will be a size setting for your front left and right speakers. This actually has less to do with the physical size of your speaker. It's more about bass management.
Try setting the speakers to “small,” even if you’re using floor-standing speakers. The “small” setting will send more of the low frequencies to the subwoofer.
Crossover — Setting the speaker size automatically sets a crossover point. But you can fine-tune it manually. For bookshelf speakers, you’ll want a crossover frequency around 120 Hz. For large tower speakers, try 60 Hz.
Phase switch — If your sub still feels a little off, your subwoofer may be out of phase with your speakers. Most subs have a two-position phase switch on the back. Toggle it to the other setting and see if you get better bass.
Level control — Most subs have independent volume controls. It’s an easy way to get a little more oomph or dial back a particularly loud soundtrack. You may need to make adjustments from movie to movie.
Put your sub on a platform — If your floor, walls, and ceiling vibrate to the beat of your sub, you get unwanted resonances that color the sound of your bass. To stop the vibrations, place your sub on a sound-absorbing platform.
Bonus tip
What if my receiver doesn’t have a sub output or my sub has no LFE input?
Depending on your available connections, you may be able connect your sub using one of the following two options:
To use stereo preamp-level connections, you may have to switch your sub out of LFE mode.
With some subs, you can connect your receiver's front speaker outputs to the sub's speaker-level inputs, and then connect your front speakers to the sub's speaker outputs.
Our tech support team is here to help
If you purchase your home theater gear from Crutchfield, our Virginia-based Tech Support team can help you with setup, connections, and fine-tuning. Give them a call at the phone number found on your invoice and shipping confirmation email.
Need help choosing a powered subwoofer?
Need help choosing a sub? Check out our Subwoofers buying guide. Or contact us today.
Comments (63)
Please share your thoughts below.
-
Neydson from salvador ba brazil
Posted on 10/5/2023
Materia muito bem explicada, a equipe está de parabens.
-
Steve Kloscak from Goodyear
Posted on 11/2/2021
Regarding: Setting speaker size. Speakers enclosures have built in crossovers, from the manufacturer. No need to block low frequencies from the AVR to the speaker. Set them to large because the internal crossovers with work correctly. Then use LFE + Main for the subwoofer setting. My system sounds way better with this setup. I have a Denon AVR
-
Stephen Hoffman from Aberdeen,MD
Posted on 10/13/2021
How do I find a professional installer in my area?
Eric Angevine from Crutchfield
on 10/14/2021
Stephen - We have a tool that will help you find a certified installer near you. Just pop in your zip code on that page and you'll get a list. Thanks!
-
Hamilton Gray from Srilanka.. Negombo
Posted on 9/30/2021
Thank you very much for guiding us how to get the maximum out of a Subwoofer..Great information..
-
Matthew from Portland, OR
Posted on 9/14/2021
My receiver doesn't have a sub out. If I run speaker wire to the sub input and then out to the mains, do I have to run both L and R speakers through the sub to keep them sonically balanced or can I have one main wired directly from the receiver to reduce the wire sprawl?
Eric Angevine from Crutchfield
on 9/15/2021
Matthew - I don't really know enough about the subwoofer to make a definite call, but in general I'd want my L/R mains to be in balance. If you bought any of your gear from us, your best bet is to reach out to tech support - it's free!
-
Victor from Hamden
Posted on 2/28/2021
Hi, do I need a rca y splitter for my psw10 ( because it has a r and l rca plugs)or can i just use a single rca ,using one side on the sub,connected to my sony 590 reciever? Some people have said that using both rca plugs on the sub makes it louder . Thanks.
Eric Angevine from Crutchfield
on 3/1/2021
Victor - I peeked at the manual for the sub, and found this: "If your receiver or processor only has a single subwoofer line output, either the left or right input jack can be used." I know the subwoofer outputs on the back of that receiver are intended to send signal to two separate subwoofers, and I must admit I don't know what would happen if you plugged both into your single sub - I've never tried it, but it doesn't sound like the manufacturer's intent. The loudness of the subwoofer will really be a function of the built-in amp. Hope this helps!
-
Kyle Kondert from Sioux Falls, SD
Posted on 2/27/2021
Hi. I have a couple questions for you... I have a Denon X2300W Receiver. (I need to upgrade) and a Helfire XTEQ12 Powered sub. I bought a Mediabridge 8 foot Y cable. Would I be able to use that cable to connect them? Its a nice cable, hate to find out that I couldn't use it. My other question is, I have Definitive Technology Mythos STS towers and the amp on one of them doesn't work anymore so there isn't anything to drive that woofer. Can I use my sub out to connect to it to drive the woofer? The Mytho does have an LFE in. Sorry, I have one more question. I have Def Tech SR9080'S and SR9040'S surrounds. Which ones should I use for my sides and which for my rears? So I guess have 3 questions for you to HOPEFULLY answer for me. I wish that I was able to find a replacement amp for my mytho STS. I hear they kinda had programs with them I guess. I have the Def Tech CS9080 Center channel also. I had the system for almost 5 yrs now. I actually had the SR90840's for just about a yr. I got both for the price of one. They were used but in pristine shape. I had to jump on that opportunity. My weakest link is the Denon, can't afford to upgrade quite yet. Lol. Well I guess the Mytho tower is one too but only for now. I really like the Mytho's so I have to find a way to replace the amp on that...Anyway, any answers that you can give me and/or that you can find out, I would REALLY REALLY appreciate it. Thank you so much in advance.
Eric Angevine from Crutchfield
on 3/1/2021
Kyle - I'll see what I can do. Question 1: I don't have any hands-on experience with that sub, but it looks like it has the usual LFE inputs, so you can try it with that cable, though typically a sub only needs one input from the subwoofer output on the receiver (if it doesn't sound right, try unplugging one side of the Y). Question 2: A subwoofer output is sending only signal, so if the amp it out on the Mythos, you won't get any power from it (and I'm not sure it would work anyway). Question 3: Without knowing the dimensions of your room, it's hard to say which speaker would be better on the sides or in the back. The 9080s have a slightly bigger woofer, so it may come down to your personal preference as to whether you want that punch coming from the sides or the back. Hope this helps!
-
Louis Messere from Youngstown
Posted on 2/25/2021
How do I connect a powered sub with an lfe connection to a new receiver that has rca connections? I'm upgrading receivers and would like to keep my life powered sub, but the receivers all have rca jacks.
Eric Angevine from Crutchfield
on 2/26/2021
Louis - If you're in the process of upgrading your receiver, and want to keep that subwoofer, you want one with a dedicated subwoofer output. Here is a link showing home theater receivers with subwoofer outputs. Hope that helps!
-
Christopher from Windsor
Posted on 2/1/2021
Hi - I bought a Cambridge CXA81 integrated amplifier and Focal Chora 826 floorstanders. I prefer a sub to round out the lower frequencies and provide some 'kick' but cannot for the life of me figure out the best way to connect the CXA81 to the SVS SB-2000 subwoofer I bought. I tried the Subwoofer output on the CXA81 - it's "OK" but not as good as I was expecting...I've read online that the Subwoofer output on the CXA81 is WAY too high to really matter much...Is another option to use the Pre-Out to connect to the Subwoofer and then back into the CXA81? But then I don't know how I would switch inputs on the CXA81. Any advice on how to set this up would be appreciated. Thank you!
Eric Angevine from Crutchfield
on 2/2/2021
Christopher - I feel like the subwoofer output to the LFE input on the subwoofer should give you what you're looking for, but it doesn't sound like it's working the way you want it to. The only other thing I can think of is to make sure the crossover on the sub is set properly to pick up where the Chora speakers leave off. Or to get really tweaky with the SVS EQ in the app. To get really hands-on, methodical diagnosis, it would be best to talk to a tech support rep on the phone so they can walk you through a few scenarios. Thanks for the question!
-
Rick Munn from Charlottetown
Posted on 1/1/2021
Hi,Greatly appreciate all of Crutchfield's tips and self-help articles, they're fantastic!Kind Regards,Rick
Related products
Loading...
Adding...
$74.99
Loading...
Adding...
$299.00
Loading...
Adding...
$599.99
Loading...
Adding...
$399.00
Related articles & videos
See all
- Home theater subwoofers buying guide Having the right powered subwoofer is crucial to the home theater experience. Learn how to choose the best one for your system, along with tips for getting great bass in your room. by Crutchfield's Kramer C.
- Best home theater subwoofers for 2024 Our favorite powered subwoofers for different rooms, tastes, and budgets. by Crutchfield's Archer A.
- Speaker placement for home theater How to position your speakers in 5.1, 7.1 and other surround sound setups. by Crutchfield's Kramer C.
- Intro to home theater speakers What are the best surround sound speakers for your home? The answer largely depends on the size of your room. This guide walks you through how to build a well-matched home theater system. Learn the role that each speaker plays, along with tips for choosing the right ones for your system. by Crutchfield's Archer A.
- Small home theater ideas Learn about surround sound system design for small rooms. Find home theater gear that fits your space. by Crutchfield's Jim R.
- 6 tips for home A/V cable management Learn how to conceal the wires hanging down from your wall-mounted TV. Tame the wire mess behind your A/V receiver. Hide the wires running to your rear speakers. by Crutchfield's Ralph G.
- Klipsch vs Polk Everything you need to know to decide whether you should choose Klipsch or Polk speakers for your home audio or home theater system. by Crutchfield's Archer A.
- Sound bar vs. 3.1 home theater What's better — a sound bar or individual speakers? The answer is, of course, it depends. In this article, the writer explains why she chose to replace her trusty sound bar with a 3.1 system. by Crutchfield's Emily S.
- Home speakers 101 What you need to know before you start shopping for home speakers. by Crutchfield's Kramer C.
Compare the sound
SpeakerCompare™
Patented Virtual Audio™ technology for auditioning speakers online
Recommended
You can change this setting any time by clicking 'Headphones' in the main menu.
Don't see your headphones?
Rent our Listening Kit
SpeakerCompare™ is protected by patents and patent applications owned by Crutchfield Corporation.
SpeakerCompare™
Patented Virtual Audio™ technology
Audition speakers before you buy
SpeakerCompare simulates the sound of home and car speakers through your headphones. It lets you compare sonic characteristics between speakers so that you can make a more informed shopping decision.
To get started: For the best sound comparison, we recommend selecting your brand and model of headphones in the right-hand column, or if your headphones aren't listed, you can rent one of our Listening Kits.
SpeakerCompare™ is protected by patents and patent applications owned by Crutchfield Corporation.
Please select a track to continue
SpeakerCompare™
...
What to listen for
Track notes
Artist
- analyzer
- log
- linear
- messages
We're here to help
For free personalized advice, call 1-888-291-8923. Our Advisors have listened to most of the speakers we carry, and can help you make the best choice for your system.
We'd love to know what you think
Select your headphones
Recommended
You can change this setting any time by clicking 'Headphones' in the main menu.
Don't see your headphones?
Rent our Listening Kit
Select a track to start listening
Audition speakers before you buy
SpeakerCompare simulates the sound of home and car speakers through your headphones. It lets you compare sonic characteristics between speakers so that you can make a more informed shopping decision.
Why selecting your headphones is important
SpeakerCompare tailors your listening experience to the exact headphones you have, so that what you hear is comparable to auditioning speakers side-by-side in person. Knowing which model headphones you’re using lets us remove any sonic coloring from your experience.
Two different listening modes
In an actual listening room, you'd find that some speakers play louder than others when fed the same amount of power. In equal power mode, you'll hear these differences in loudness as they naturally occur between speakers.
In equal volume mode, we've made the loudness of each speaker about the same. This gives you a more direct comparison of subtle voicing differences between speakers.
Nothing beats listening to speakers in your space
SpeakerCompare gives you a sense of the sonic differences. But performance in the real world is affected by the acoustics of your car or home, your choice of amplification, and your source material. We still believe that the gold standard for auditioning speakers is hearing them in your own environment — that’s why we offer a 60-day money-back guarantee.
Our Listening Kit
To help you choose the right speakers, we recommend using Crutchfield’s SpeakerCompare Listening Kit. It includes a pair of studio-quality headphones, and a guide to getting the most out of your session, and a few other necessary items. We’ve carefully chosen the components of this kit to ensure a crystal-clear listening experience. It’s available for a nominal rental fee, and includes a $25 Crutchfield merchandise credit.
Request a kit
Rate your experience with SpeakerCompare
Thank you for your feedback!
We'd love to know what you think